Nortel Networks 450 - Manual (Page 281)

Default Settings
302401-D Rev 00 F-5
Bridge Priority 8000 (read only) Spanning Tree Switch Settings
(
page 3-72 )
Designated Root 8000 (bridge_id) (read only)
Root Port 0 (read only)
Root Path Cost 0 (read only)
Hello Time 2 seconds (read only)
Maximum Age Time 20 seconds (read only)
Forward Delay 15 seconds (read only)
Bridge Hello Time 2 seconds (read only)
Bridge Maximum Age Time 20 seconds (read only)
Bridge Forward Delay 15 seconds (read only)
TELNET Access Enabled TELNET Configuration ( page 3-75 )
Login Timeout 1 minute
Login Retries 3
Inactivity Timeout 15 minutes
Event Logging All
Allowed Source IP Address
(10 user-configurable fields) First field: 0.0.0.0
(no IP address assigned)
Remaining nine fields:
255.255.255.255
(any address is allowed)
Allowed Source Mask
(10 user-configurable fields)
For details about this field, see
Table 3-27 on page 3-76 .
First field: 0.0.0.0
(no IP address assigned)
Remaining nine fields:
255.255.255.255
(any address is allowed)
Image Filename Zero-length string Software Download ( page 3-78 )
TFTP Server IP Address 0.0.0.0
(no IP address assigned)
Start TFTP Load of New Image No
(continued)
Table F-1. Factory Default Settings for the BayStack 450 Switch (continued)
Field Default setting Appears in this CI screen
kombk.book Page 5 Tuesday, June 29, 1999 3:25 PM