beautypg.com

Port configuration, Port configuration -32 – Nortel Networks 450 User Manual

Page 164

background image

Using the BayStack 450 10/100/1000 Series Switch

3-32

302401-D Rev 00

Port Configuration

The Port Configuration screen (Figures

3-13

and

3-14

) allows you to configure

specific switch ports or all switch ports. You can enable or disable the port status
of specified switch ports, set the switch ports to autonegotiate for the highest
available speed of the connected station, or you can set the speed for selected
switch ports (autonegotiation is not supported on fiber optic ports).

You can disable switch ports that are trunk members; however, the screen prompts
for verification of the request before completing the action. Choosing [Yes]
disables the port and removes it from the trunk.

Choose Port Configuration (or press p) from the Switch Configuration Menu
screen to open the Port Configuration screen.

Figure 3-13.

Port Configuration Screen (1 of 2)

Note:

The Autonegotiation fields, the Speed fields, and the Duplex fields are

independent of MultiLink trunking, rate limiting, VLANs, IGMP Snooping,
and the STP.

Port Configuration
Unit: [ 1 ]
Port Trunk Status Link Autonegotiation Speed Duplex
---- ----- ------------ ---- ---------------- -----------------
1 [ Enabled ] Up [ Enabled ] [ 100Mbs / Half ]
2 [ Enabled ] Up [ Enabled ] [ 100Mbs / Half ]
3 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
4 [ Enabled ] Down [ Disabled ] [ 100Mbs / Half ]
5 [ Enabled ] Up [ Enabled ] [ 10Mbs / Full ]
6 1 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
7 1 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
8 [ Enabled ] Up [ Enabled ] [ 10Mbs / Full ]
9 1 [ Enabled ] Up [ Disabled ] [ 100Mbs / Full ]
10 [ Enabled ] Down [ Enabled ] [ 100Mbs / Full ]
11 [ Enabled ] Down [ Enabled ] [ 100Mbs / Full ]
12 [ Enabled ] Down [ Disabled ] [ 100Mbs / Half ]
13 2 [ Enabled ] Down [ Disabled ] [ 10Mbs / Full ]
14 2 [ Enabled ] Down [ Disabled ] [ 10Mbs / Full ]
More...

Press Ctrl-N to display choices for additional ports..
Use space bar to display choices, press or to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu

kombk.book Page 32 Tuesday, June 29, 1999 3:25 PM