Logout, Logout -93, Figure 3-43. password prompt screen -93 – Nortel Networks 450 User Manual
Page 225
Using the Console Interface
302401-D Rev 00
3-93
Logout
The Logout option (accessed from the main menu) allows a user working at a
password-protected console terminal or in an active TELNET session to terminate
the session.
The Logout option works as follows:
•
If the user is accessing the BayStack 450 switch through a TELNET session,
the Logout option terminates the TELNET session.
•
If the user is accessing the BayStack 450 switch through a password-protected
console terminal (connected to the console/comm port on the switch), the
Logout option displays the console-terminal password prompt (
The user must enter the correct password to access the CI screens.
Figure 3-43.
Password Prompt Screen
You can specify whether a password is required for the TELNET session or the
console terminal using the Console/Comm Port Configuration screen (see
“Console/Comm Port Configuration
” on
If the console terminal is not password protected, the system ignores the Logout
option.
BayStack Model 450-
xxx HW:Revx FW:Vx.xx SW:Vx.x.x.x
Password: [ *************** ]
Enter Password:
kombk.book Page 93 Tuesday, June 29, 1999 3:25 PM