Nortel Networks 450 - Manual (Page 201)

Using the Console Interface
302401-D Rev 00 3-69
Spanning Tree Port Configuration
The Spanning Tree Port Configuration screen allows you to configure individual
switch ports or all switch ports for participation in the spanning tree.
Figures 3-29 and 3-30 show sample port configurations for the two Spanning Tree
Port Configuration screens.
Choose Spanning Tree Port Configuration (or press c) from the Spanning Tree
Configuration Menu to open the Spanning Tree Port Configuration screen.
Figure 3-29. Spanning Tree Port Configuration Screen (1 of 2)
Note: If spanning tree participation of any trunk member is changed (enabled
or disabled), the spanning tree participation of all members of that trunk is
changed similarly.
Spanning Tree Port Configuration
Unit: [ 1 ]
Port Trunk Participation Priority Path Cost State
---- ----- ------------------- -------- --------- ----------
1 [ Normal Learning ] 128 10 Forwarding
2 [ Normal Learning ] 128 10 Forwarding
3 [ Normal Learning ] 128 10 Forwarding
4 [ Normal Learning ] 128 10 Forwarding
5 [ Normal Learning ] 128 10 Forwarding
6 1 [ Normal Learning ] 128 10 Forwarding
7 1 [ Normal Learning ] 128 10 Forwarding
8 [ Normal Learning ] 128 10 Forwarding
9 1 [ Normal Learning ] 128 10 Forwarding
10 [ Normal Learning ] 128 10 Forwarding
11 [ Normal Learning ] 128 10 Forwarding
12 [ Normal Learning ] 128 10 Forwarding
13 3 [ Normal Learning ] 128 10 Forwarding
14 3 [ Normal Learning ] 128 10 Forwarding
More...
Press Ctrl-N to display choices for additional ports..
Use space bar to display choices, press or to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
kombk.book Page 69 Tuesday, June 29, 1999 3:25 PM