Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 97)

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
Copyright © Nortel Networks Limited 2006
Installing and launching the System
Management Console
Prerequisites
Make sure that
• The dbdeploy.pl script has been successfully executed.
• The mgmtdeploy.pl script has been successfully executed.
• The Sysmgr is started.
• The license key is registered.
Installing the System Management Console
Procedure 25 Installing the System Management Console
At the management pc,
1 Put the MCS Base Platform System Software CD (MCS
Management Console PC software) into the PC’s CD-ROM.
2 Navigate to the CD-ROM drive and double click on the
executable mcpmc_setup.exe.
3 To install the System Management Console, click Next.
4 To select default program folder, click Next.
5 Enter the .
Example: 120.120.13.22
6 Click Next.
7 Enter the System Management server port. Keep the default
11111
.
8 Click Next.
9 Keep default destination folder.
10 Click Next.
11 Review settings before copying files.