Nortel Networks Sun Fire V210 (RoHS) User Manual
Page 123
![background image](/manuals/190091/123/background.png)
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
123
Copyright © Nortel Networks Limited 2006
2
Use the values from the table that follows to complete the
Database Base tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
3
Use the values from the table that follows to complete the
UNIStim Base tab parameters.
Phase 1 Firmware ID
B60
default
Phase 2 Firmware ID
D61
default
Use UFTP
checked
Box is checked.
default
UFTP Server Port
50020
default
Keep Alive Timer
40
default
KA Phone Timer
90
default
Switch Server Delay
5000
default
Min ReReg Delay
60000
default
Max # Reg Attempts
25
default
Server Recovery
Time Min
1
default
Server Recovery
Time Max
5
default
Table 17 IP Client Manager tab (Sheet 2 of 2)
Parameter
Recommended Value
Notes
Example
Table 18 Database Base tab
Parameter
Recommended value
Notes
Example
Primary Host
120.120.13.22
Connections
5
default
Secondary Host
Leave blank
default