Installing disk 6 (mgmtsvr/acctmgr only) – Nortel Networks Sun Fire V210 (RoHS) User Manual
Page 69
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
Copyright © Nortel Networks Limited 2006
Installing Disk 6 (MgmtSvr/AcctMgr
only)
Approximate time estimate = 30 minutes
Procedure 19 Installing CD 6
At the management pc,
1
Place CD6 in the CD-ROM drive, on the server, and press Enter
at the prompt.
Note: CD6 will eject from the CD-ROM when installed.
2
After the reboot, log in (using the Serial MGT port) and change
the passwords for the sysadmin, root, and nortel users.
ATTENTION
CD6 must be installed on the MgmtSvr and on the AcctMgr
machines only. If you do not install CD6, you will not be able to
deploy or start the secondary MgmtSvr or AcctMgr.