Provisioning module) – Nortel Networks Sun Fire V210 (RoHS) User Manual
Page 60
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006
60
Copyright © Nortel Networks Limited 2006
24
Enter the
25
Enter the
26
Enter the
You are asked to confirm the LOM port configuration.
27
Type Y to accept the LOM port configuration or N if you want to
change something.
The system will now reboot and come up requesting that you
insert CD5.
CD4 will eject from the CD-ROM drive when installed.
Application servers (SIP Application Module, IPCM, Web Client
Manager, Provisioning Module)
Approximate time estimate = 15 minutes
Procedure 16 Installing CD4
At the management pc,
1
Place CD4 in the CD-ROM drive and press Enter to continue.
WAIT until you see the following statement appear:
”You are now configuring the NTP time source for
this server. The servers which run the
Management and Accounting service will be the
source. You will need to provide the Machine
Logical IP Address of each server. If running
simplex mode, provide the same address twice.”
2
Press Enter to continue.
3
You will see the following message: "NTP Source 1: Enter
the MACHINE Logical IP Address of the Management
Server:
Enter the IP address, for example: 120.120.13.22
4
You will see the following message: "NTP Source 2: Enter
the MACHINE Logical IP Address of the Accounting
Server:
Enter the IP address, for example: 120.120.13.22
ATTENTION
If you are not prompted for CD5, contact support.