Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 49)

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
49 Copyright © Nortel Networks Limited 2006
Network Connectivity/Networked
3 Accept the default Yes by pressing Esc+2 to continue.
DHCP/Use DHCP
4 Accept the default No by pressing Esc+2 to continue.
Primary Network Interface /Primary Network Interface
5 Choose bge0 as the primary network interface and press Esc+2
to continue.
Host name/Host name
6 Enter the host name of the server, for example: micromgmt
Note 1: Host name cannot start with a number. Host names
must be at least two characters and can contain alphanumeric
characters and minus signs (-).
Note 2: Host names must be unique within your domain.
Creating a duplicate host name will cause problems on the
network after you install Solaris.
Press Esc+2 to continue.
IP Address
7
Enter the machine logical IP address.
Example: 120.120.13.22
Press Esc+2 to continue.
Subnets/System part of a subnet
8 Accept the default Yes by pressing Esc+2 to continue.
ATTENTION
Make sure you enter the machine logical IP address for this
system. It must be unique and follow your site’s address
conventions.