Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 20)

NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006
20 Copyright © Nortel Networks Limited 2006
Server configuration
The following table shows the basic configuration of the 2-server V210
Solaris system.
Loading disks
MCS 5100 Release 3.0 Base Platform System SoftWare Kit
NTVW01AJ contains multiple copies of the same CDs to allow
simultaneous installation across servers. See
Table 2, Mapping of Kit
NTVW01BD disks to servers (with times), on page 21 for details. Nortel
Networks recommends that you install the same CDs on both servers
at the same time to reduce installation time.
As shown in Table 2, Mapping of Kit NTVW01BD disks to servers (with
times) , Disks 1-5 have four copies each. Disk 6 only needs to go on
Server 1 (the server on which the Management and Accounting
Modules reside). There are six Oracle disks, with one copy, going on
Server 1(the server on which the Database Module resides).
Table 1 2-server configuration
Configuration Server type Components
2-server V210
Solaris Server1 Active System Manager
Active Accounting Manager
Primary database
Oracle Monitor
Server2 IPCM (S1)
Active Provisioning Module
Active SIP Application Module
Active WebClient Manager
iPlanetMonitor
UFTP Base Software