Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 34)

1.1 Incoming Call Features
34 Feature Guide
1.1.3.2 Ring Tone Pattern Selection
Description
A ring tone pattern can be selected for each incoming call type on a Ring Tone Pattern Table
basis, which can be assigned for each extension.
[Patterns]
*: S-Double can be assigned for call back ring only.
[Ring Tone Patterns for a PT/PS]
[Programming Example of Ring Tone Pattern Table]
There are a specified number of programmable tables each of which allows the assignment of
ring tone patterns for the following incoming call types:
For trunk calls (including trunk call hold recalls) and doorphone calls, select ring tone patterns
on a trunk group or a doorphone port basis.
Each extension can select one of the tables.
Telephone Type
Ring Tone Pattern
Single Double Triple S-Double*
PT/PS Cannot be changed. Refer to the [Ring Tone Patterns for
a PT/PS] below.
SLT Each pattern and its ringing cycle can be changed.
Table
No.
Intercom
Call/Hold
Recall
Trunk Call/Hold
Recall
Doorphone Call
Alarm
Call
Back
LCS
TRG1 TRG2 ... Port 1 Port 2 ...
1 Double Single Single
2 Single Double Double
: : : : : : : : : : :
1 280 ms
Single
Double
Triple
S-Double