Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 21)

1.1 Incoming Call Features
Feature Guide 21
• The Inter-digit Time
When the Inter-digit time expires, the PBX stops receiving DID/DDI number and starts to
check the DID/DDI table. (Refer to the [Programming Example of DID/DDI Table] above).
Even if the Inter-digit time does not expire, the PBX stops receiving the DID/DDI number
when the received number is found in the DID/DDI table. The PBX then routes the call to
the corresponding destination. If the received number matches several DID/DDI numbers
in the table, the DID/DDI number of the lowest numbered location has priority.
[Example] If a call is received in Lunch mode;
Feature Guide References
1.1.1.5 Calling Line Identification (CLI) Distribution
2.2.4 Time Service
Received
Number
Destination Explanation
123-4567 Extn. 100 The PBX finds the match in location 0001
in the table after receiving "7". So the call
is routed to extension 100.
123-456 Extn. 101 The Inter-digit time expired after
receiving "6". The PBX finds the match in
location 0003 in the table. So the call is
routed to extension 101.