5 calling line identification (cli) distribution, Description – Panasonic HYBRID IP-PBX KX-TDA200 User Manual
Page 25
1.1 Incoming Call Features
Feature Guide
25
1.1.1.5
Calling Line Identification (CLI) Distribution
Description
Directs an incoming trunk call to a destination when the caller’s identification number (e.g.,
Caller ID) matches the number in the System Speed Dialling Table which is used as the Caller
ID Table. Each Caller ID (System Speed Dialling) number can have its own destination.
CLI always works in conjunction with the following call distribution methods:
a)
DIL
b)
DID/DDI
c)
MSN Ringing Service
Each trunk (for DIL) and the DID/DDI/MSN number can enable or disable the CLI feature for
each time mode (day/lunch/break/night) (
When the call has its Caller ID and the CLI is enabled for the time mode, the call will be handled
by the CLI method.
[Programming Example of System Speed Dialling Table for CLI]
CLI Feature
Description
Details in
Caller ID
Caller’s number is sent from an analogue
trunk.
Calling Line Identification
Presentation (CLIP)
Caller’s number is sent from an ISDN line. • 1.19.1.2
Calling/
Connected
Line
Identification
Presentation
(CLIP/COLP)
Automatic Number
Identification (ANI)
Caller’s number is sent from an E1 or T1
line.
• 1.20.1 E1
Line Service
• 1.21.1 T1
Line Service
Location
(Speed Dialling No.)
System Speed
Dialling No.
*1
System Speed
Dialling Name
*2
CLI Destination
000
901234567890
ABC Company
200
001
:
:
:
:
:
:
:
*1
:
System Speed Dialling Number [001]
*2
: