Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 214)

1.23 Portable Station (PS) Features
214 Feature Guide
1.23.5 Wireless XDP Parallel Mode
Description
A PS can be used in parallel with a wired telephone (PT/SLT). In this case, the wired telephone
is the main telephone and the PS is the sub telephone. When Wireless XDP Parallel Mode is
enabled, the two telephones share one extension number (main telephone’s extension
number) like XDP Parallel mode for a DPT and an SLT.
Conditions
• If one of the telephones goes off-hook while the other telephone is on a call, the call is
switched to the telephone going off-hook. However, the call is not switched in one of the
following conditions:
a) During a Conference call ( 1.13.1 Conference Features).
b) While the Live Call Screening (LCS) or Two-way Record is activated ( 1.22.3 Voice
Mail DPT (Digital) Integration).
c) While receiving the OHCA ( 1.7.4.3 Off-Hook Call Announcement (OHCA)).
d) While being monitored by another extension ( 1.7.3 Call Monitor).
e) During Consultation Hold.
(Consultation Hold: Allows an extension user to place a call on hold temporarily to
perform Call Transfer, Conference, or Call Splitting.)
• Wireless XDP Parallel Mode can only be set from a PS. The wired telephone can accept
or deny this feature through COS programming (
Wireless XDP Parallel Mode for Paired
Telephone [515]). Once this feature is set, the setting at the wired telephone cannot be
changed unless a PS changes the setting.
• The following features are not available for extensions in Wireless XDP Parallel Mode
while the PS is on a call (however, they are available for the extensions in Wireless XDP
Parallel Mode while the wired telephone is on a call):
– Automatic Callback Busy
PT
Cell Station
Wireless Phone
DHLC
PBX
XDP Parallel Mode Wireless XDP
Parallel Mode
Extn. 102
PT PS
Extn. 103