Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 293)

2.3 System Data Control
Feature Guide 293
2. Flexible Numbering (available while busy, DND, or ringback tone is heard)
Feature numbers which are available while busy, DND, or ringback tone is heard can be
customised for easy use. The numbers should be one digit ("0 through 9" , " ", or "#" )
and must not conflict. For default, refer to the following table:
[Flexible Numbering Table (available while busy, DND, or ringback tone is heard)]
3. Fixed Numbering (available while dialling or talking)
The features which are available while dialling or talking have fixed numbers as shown in
the following table:
[Fixed Numbering Table (available while dialling or talking)]
Conditions
• The PBX has default for numbers.
• The following are examples of feature number conflicts: 1 and 11, 0 and 00, 2 and 21, 10
and 101, 32 and 321, etc.
Feature Default
Pattern 1
(with )
Pattern 2
(without )
Extension Personal Identification Number (PIN)
set/cancel 799 799
Dial Information (CTI) None None
Other PBX Extension Number (TIE) -1-16 None None
Quick Dialling 1-80 None None
Feature Default
Call Waiting/DND Override 1 or 2*
Executive Busy Override 3
Message Waiting set 4
Call Monitor 5
Automatic Callback Busy/CCBS 6
Alternate Calling—Ring/Voice
*: To use Call Waiting/DND Override, both "1" and "2" are available by default.
Feature Fixed
Numbering
Pulse to Tone Conversion
Conference 3
Door Open 5