Conditions, Feature guide references – Panasonic HYBRID IP-PBX KX-TDA200 User Manual
Page 155
1.16 Caller ID Features
Feature Guide
155
[Example]
3.3 Caller’s Name Reference
A name can also be shown on the display or SMDR. The PBX searches for the name
in the following order:
1) Personal Speed Dialling data of the original called extension
2) System Speed Dialling (Caller ID) Table
3) Caller ID name received from the public line (Caller ID Name Reference)
If the name is not found, it will not be displayed.
Conditions
•
Caller ID signalling type can be selected through system programming (
•
The Caller ID Name Reference is only available for calls from the public network.
•
For Users in New Zealand only
Using the toll services of a company other than Telecom NZ.
If the PBX is set up to use the toll services of a company other than Telecom NZ, the
telephone numbers dialled from the Caller Display listings within the PBX will be directed
through the toll services of the other company because the telephone numbers include the
toll access digit and area code digit. A toll charge may be incurred. Please check with the
toll carrier concerned.
Feature Guide References
1.6.1.4 Speed Dialling—Personal/System
1.24.1 Station Message Detail Recording (SMDR)
Location
(Speed
Dialling No.)
System Speed Dialling
No.
*1
System Speed Dialling
Name.
*2
CLI
Destination
000
90123456789
ABC Company
200
001
:
:
:
:
:
:
:
*1
:
System Speed Dialling Number [001]
*2
: