Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 258)

1.27 Networking Features
258 Feature Guide
CLIP/COLP Number:
The extension number sent to the QSIG network for CLIP/COLP can be assigned for each
extension through system programming (
Extension Number [003]).
CNIP/CONP Name:
The extension name sent to the QSIG network for CNIP/CONP can be assigned for each
extension through system programming (
Extension Name [004]).
Calling/Connected Line Identification Restriction (CLIR/COLR):
It is possible for each extension to restrict the sending of its extension number to the QSIG
network by pressing the CLIR button, COLR button, or entering the feature number.
Calling/Connected Name Identification Restriction (CNIR/CONR):
It is possible for each extension to restrict the sending of its extension name to the QSIG
network. When CLIR is activated, CNIR becomes active automatically. When COLR is
activated, CONR becomes active automatically.
These features comply with the following European Telecommunication Standard (ETS)
specifications:
CLIR/COLR: ETS 300 172 Circuit mode basis services.
CNIR/CONR: ETS 300 238 Name identification supplementary services.
Conditions
• COLP/CLIR/COLR/CNIP/CONP/CNIR/CONR Assignment for Each Port
Each service can be enabled or disabled on each ISDN (QSIG) port of the PBX.
• CLIR Button and COLR Button
It is possible to switch between CLIP and CLIR by pressing the CLIR button, and COLP
and COLR by pressing the COLR button. A flexible button can be customised as the CLIR
or COLR button.
Feature Guide References
1.18.2 Flexible Buttons
User Manual References
User Manual
1.7.4 Displaying Your Telephone Number on the Called Party and Caller’s Telephone
(Calling/Connected Line Identification Presentation [CLIP/COLP])
1.7.5 Preventing Your Telephone Number Being Displayed on the Caller’s Telephone
(Connected Line Identification Restriction [COLR])
1.7.6 Preventing Your Number Being Displayed on the Called Party’s Telephone (Calling
Line Identification Restriction [CLIR])