Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 234)

1.27 Networking Features
234 Feature Guide
1.27 Networking Features
1.27.1 TIE Line Service
Description
A TIE line is a privately leased communication line between two or more PBXs, which provides
cost effective communications between company members at different locations. The TIE lines
can be used to call through the PBX to reach another switching system (PBX or telephone
company). By using TIE lines, the PBX can support not only communications with the public
network but with other company members in the private network where the PBX is included.
Interface
The following interfaces can be used to establish a private network:
A trunk which is used for a private network should be assigned " Private " as the networking
type. ( 1.1.1.1 Incoming Trunk Call Features—SUMMARY)
Explanation
1. Making a TIE Line Call
One of the following two methods can be used to make a TIE line call.
a) Extension Number Method (Access without PBX Code)
Dial the [Extension Number] only.
Interface Network Type
E & M Analogue
T1 (E & M) Digital (64 kbps
× 24 channels)
E1 (E & M) Digital (64 kbps
× 30 channels)
BRI/PRI (QSIG) Digital (ISDN 2B+D/30B+D/23B+D)
VoIP Internet Protocol (IP)