Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 123)

1.10 Conversation Features
Feature Guide 123
[DPT + SLT]
• A DPT and an SLT must be connected to one super hybrid port of the DHLC card.
• If the eXtra Device Port (XDP) mode is enabled, each telephone can act as completely
different extensions with their own extension number. (
2.1.1 Extension Port
Configuration)
• When in the parallel mode, the XDP mode of the super hybrid port should be off through
system programming.
[APT/DPT/SLT + PS]
• This connection is called the Wireless XDP Parallel Mode.
Installation Manual References
Installation Manual
2.7.2 Parallel Connection of the Extensions
2.7.3 Extra Device Port (XDP) Connection
Feature Guide References
1.23.5 Wireless XDP Parallel Mode
User Manual References
User Manual
1.7.11 Setting the Parallel Telephone to Ring (Parallelled Telephone)