Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 233)

1.26 Audible Tone Features
Feature Guide 233
1.26.2 Confirmation Tone
Description
At the end of feature operations, the PBX confirms the success of the operation by sending a
confirmation tone to extension users.
Conditions
• Confirmation Tone Patterns and Frequencies
All confirmation tone patterns have a default (
4.2.1 Tones/Ring Tones). All confirmation
tone patterns and frequencies can be rearranged as desired.
• It is possible to eliminate each tone.
Type Description
Tone 1 a) Sent when the setting is accepted.
b) Sent when a call is received in voice-calling mode (Alternate
Receiving—Ring/Voice). The caller’s voice will be heard after
the tone.
Tone 2 a) Sent from an external paging device or an extension before
being paged.
b) Sent when a call is received in Hands-free Answerback
mode.
Tone 3-1 a) Sent before a conversation is established when using the
Paging feature.
b) Sent when a conversation is established with the extension in
the following modes after the call making operation:
• Hands-free Answerback mode
• Voice-calling mode (Alternate Receiving—Ring/Voice)
Tone 3-2 Sent just before a conversation is established when accessing
the following features by the feature numbers:
• Call Park Retrieve
• Call Pickup
• Hold Retrieve
• Paging Answer
• TAFAS
Tone 4-1 Sent when moving from a two-party call to a three-party call.
(e.g., Executive Busy Override, Conference, Privacy Release,
Two-way Record.)
Tone 4-2 Sent when moving from a three-party call to a two-party call.
(e.g., Executive Busy Override, Conference, Privacy Release,
Two-way Record.)
Tone 5 Sent when a call is placed on hold (including Consultation Hold).