Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 174)

1.19 Integrated Services Digital Network (ISDN) Service Features
174 Feature Guide
• Some supplementary services are provided by the key protocol ( 1.19.1.11 ISDN
Service Access by Keypad Protocol).
• Extension Number
An extension number can be assigned to each ISDN port.
• Network Type
Each ISDN port can be set to the requirements of each country/area (
BRI Network
Type [420] *For BRI only).
• L1 Active Mode and L2 Data Link Mode
The active mode of Layer 1 (L1) (
BRI Layer 1 Active Mode [424] *For BRI only) and the
data link mode of Layer 2 (L2) ( BRI Layer 2 Active Mode [425] *For BRI only) can be
selected individually, Permanent or Call by Call, on an ISDN port basis.
• TEI Assignment Mode
The Terminal Endpoint Identifier (TEI) assignment mode can be selected on an ISDN port
basis (
BRI TEI Mode [427] *For BRI only).
• Bearer Mode
The bearer mode can be assigned on an ISDN port basis.
• Automatic ISDN Configuration
ISDN (BRI) port configuration can be set automatically through system programming.
The following items will be set by making and receiving a call using the subscriber number
assigned for each ISDN (BRI) port:
Feature Guide References
1.27.3 QSIG Network
– L1 Active Mode
– L2 Data Link Mode
– Access Mode (Point-to-Point/Point-to-Multipoint)
– TEI Assignment Mode (Fix 00-63/Automatic)