Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 220)

1.24 Administrative Information Output Features
220 Feature Guide
[Programmable Items]
(7) Duration Shows the duration of the call in Hours/Minutes/Seconds.
(8) Acc Code
(Account
Code) Shows the account code appended to the call. ( 1.5.4.3
Account Code Entry)
(9) CD
(Condition
Code) Shows other call information with the following codes:
CL: Collect call
TR: Transfer
FW: FWD to trunk
D0: Call using DISA or TIE line service
RM: Remote maintenance (modem) (
2.3.1 PC
Programming)
NA: Not answered call
(10) Cost Shows the call charge.
Item Description
Outgoing trunk call Controls whether the outgoing trunk calls are shown. This
setting is common throughout the PBX (
SMDR Outgoing
Call Printing [804]). COS programming is also required.
Incoming trunk call Controls whether the incoming trunk calls are shown (
SMDR Incoming Call Printing [805]).
Outgoing intercom
call Controls whether the outgoing intercom calls are recorded.
Log-in/Log-out
status Controls whether the log-in/log-out status is recorded.
ARS dial Controls whether the user-dialled number or the modified
number is shown.
The Host PBX Access code ("=" followed by the access code)
can be shown (as supplementary information) only when the
modified number is selected in this setting. (
1.9.1 Automatic
Route Selection (ARS))
Caller’s
identification Controls whether the caller’s identification number, name,
number and name, or nothing is shown. If "
none " is selected,
will not be shown.
DID/DDI number Controls whether the DID/DDI number, name, number and
name, or nothing is shown. If "
none " is selected, will not
be shown.
Number in
the
Pattern
Item Description