Panasonic HYBRID IP-PBX KX-TDA200 - Manual (Page 161)

1.18 Proprietary Telephone (PT) Features
Feature Guide 161
1.18 Proprietary Telephone (PT) Features
1.18.1 Fixed Buttons
Description
PTs, DSS Consoles, and Add-on Key Modules are provided with the following feature/Line
Access buttons:
Depending on your device type, some buttons may not be provided.
As for buttons on PSs, please refer to the Operating Instructions for each PS.
[PT and Add-on Key Module]
Button Usage
Navigator Key,
Jog Dial,
Volume Key
Used to adjust the ringer, speaker, handset and headset
volume and the display contrast. Navigator Key and Jog Dial
can also be used to select data from the Call Directory and
the System Feature Access Menu on the display.
ENTER Used to confirm the selected item.
CANCEL Used to cancel the selected item.
PROGRAM
Used to enter and exit the programming mode.
FLASH/
RECALL
Used to disconnect the current call and make another call
without hanging up (Flash/Recall mode or Terminate mode)
or used to send a flash/recall signal to the telephone
company or host PBX to access their features (External
Feature Access mode).
HOLD
Used to place a call on hold.
SP-PHONE
(Speakerphone)
Used for hands-free operation. Also used to switch between
handset and hands-free operation.
MONITOR
Used for a hands-free dialling. Also used to monitor the
party’s voice in hands-free mode.
MESSAGE
Used to leave a message waiting indication or call back the
party who left the message waiting indication.
REDIAL Used to redial the last dialled number.