PYLE Audio IKON RUGGED 7505-BTSDCMHC25 - Manual (Page 52)

Chapter 3: Getting To Know Your Ikôn
LEDs
40 Ikôn Rugged PDA (Windows CE 5.0) User Manual
3.4.1 LEDs
Three LEDs are located on the upper-left side of the unit, above the screen. The green LED
is the battery charge indicator; the yellow LED indicates an application; the blue LED indi-
cates whether the radio is on or off. When you press [ENTER], the LED flashes green to
indicate that the unit has been powered up. The LED table following outlines the behaviour
of the LED while the unit is docked in a charger.
Keep in mind that the application running on the Ikôn can dictate how the LED operates.
Review the documentation provided with your application to determine LED behaviour.
If the unit is attached to an external power supply, the Ikôn LED reflects the battery
charge status.
Table 3.1 Function Of Ikôn LEDs
LED Behaviour Charge Status
Green Charge LED
(left-most LED) Charge indicator. See Table 3.2 for descriptions of Charge
LED behaviour.
Yellow Application LED
(center LED) Application LED. This LED’s behaviour is application-dependent.
Blue Radio Power LED
(right-most LED) Radio power indicator.
Note: The yellow LED flashes when powering up the Ikôn to show that it has started and
the Power On/Off key may now be released.
Table 3.2 Ikôn Charge LED Behaviour
LED Behaviour Charge Status
Solid Green Charge complete.
Fast Blinking Green Charge in progress. Battery charged to less than 80% capacity.
Slow Blinking Green Battery charged to greater than 80% of capacity.
Blinking Yellow The battery is low (capacity < 100mAh); or the battery is too hot
(>60°C).