PYLE Audio IKON RUGGED 7505-BTSDCMHC25 - Manual (Page 189)

Ikôn Rugged PDA (Windows CE 5.0) User Manual 177
Chapter 5: Configuration
Decoded (Internal) Scanners
Interleaved 2 of 5
If this parameter is set to One, it is assumed that the last digit is a check digit. If “Check
Digits” is set to Two, it is assumed that the last two digits are check digits.
Transmit Check Digit
If this parameter is enabled, the check digit is included with the bar code data.
Check Digit Algorithm
When the Two MSI Plessey check digits option is selected, an additional verification is re-
quired to ensure integrity. Double-tapping on this parameter displays a dialog box n which
you can choose the algorithm to be used: MOD 10/MOD 11 or MOD 10/MOD 10.
Field Size/Chars
Refer to “Field Size/Chars” on page 170 for details.
5.14.2.15 Interleaved 2 of 5
Enabled
Set this parameter to on to enable “Interleaved 2 of 5”.
Set Length L1 And Set Length L2
Lengths for “Interleaved 2 of 5” can be set for Any length, Length within a range, One dis-
crete length or Two discrete lengths. The length of a code refers to the number of characters
(i.e., human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 4 to 14.
Check Digit Verification
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies
with a specified algorithm—either USS (Uniform Symbology Specification) or
OPCC (Optical Product Code Council).
Note: If Two check digits is selected, an MSI Plessey “Check Digit Algorithm: must also
be selected. See below for details.