PYLE Audio IKON RUGGED 7505-BTSDCMHC25 - Manual (Page 113)

Chapter 5: Configuration
Power Management Properties
Ikôn Rugged PDA (Windows CE 5.0) User Manual 101
5.5.5.2 Power Saving Suspend
• In the Power Properties dialog box, open the Suspend tab.
Power Source
This dialog box allows you to specify the suspend time for either AC Power or
Battery Power.
Suspend Timeout
When the Ikôn is idle—not receiving any user input (a key touch, a scan, and so on) or
system activity (serial data, an activity initiated by an application, and so on)—the Ikôn uses
the value assigned in the Suspend Timeout field to determine when the unit will go to sleep
(appear to be off).
When the time in the Suspend Timeout field elapses without any activity, the unit enters
suspend state. In suspend state, the Ikôn CPU enters a sleep state, and the radio is shut off.
The state of the device (RAM contents) is preserved. Pressing [ENTER] wakes the system
from suspend state. When the Ikôn is in suspend state, the network connection will not be
broken immediately. If the connection is dropped, you must re-establish the network
connection.
Important: Psion Teklogix recommends setting the Suspend value to 10 minutes. To
further reduce power consumption, carefully consider the duration of time
that the display backlight is ‘on’ (see “Display Backlight” on page 84).