4 scanner/imager specifications, 1 se 955hp specifications, Scanner/imager specifications 7.4.1 – PYLE Audio IKON RUGGED 7505-BTSDCMHC25 User Manual
Page 271: Se 955hp specifications
Chapter 7: Specifications
Scanner/Imager Specifications
Ikôn Rugged PDA (Windows CE 5.0) User Manual
259
7.4
Scanner/Imager Specifications
7.4.1
SE 955HP Specifications
Max. charge voltage
4.2V +/- 1%
Recommended charge termina-
tion timeout
5.0 hr - charging must stop.
Charge Temperature
0°C to +40°C (32°F to +104°F)
Discharge Temperature
-20°C to +50°C (-4°F to +122°F)
Storage Temperature
-20°C to +50°C (-4°F to +122 ºF). Storage at elevated tempera-
tures not recommended.
25°C (77 ºF)—recommended storage temperature.
Cycle Life
300 cycles minimum with no degradation below 80% of
nominal capacity based on 1C charge / 1C discharge rates
(to 3.0V) @ 25°C (77 ºF).
Description
Specification
Scan Angle
47° ± 3° default / 35° ± 3° reduced
Scan Rate
104 (± 12) scans/sec (bi-directional)
Scan Pattern
Linear
Wavelength
650nm
Input Voltage
3.0-5.5 VDC ± 10%
Input Current
65 mA typical
Standby Current
8 µA max
Operating Temperature
-20° to 60° C
-4° to 140°F
Print Contrast
Minimum 25% absolute dark/light reflectance measured at 650 nm
Dimensions
1.21 cm H x 2.16 cm W x 1.55 cm (max)
0.47 in. H x 0.85 in. W x 0.61 in. D (max)
Symbologies
UPC/EAN, Code 128, Code 39, Code 93, I 2 of 5, Discrete 2 of 5,
Codabar, MSI Plessey