Paradyne 3910 - Manual (Page 51)

4-1 3910-A2-GN32-40 September 1998
Status Branch
Overview
The Status branch of the Top-Level menu allows you to view the current status of the leased-line
or dial connection, the identity (for example, serial number and model number) of your
equipment, and the DTE interface.
Configure PList Control Test SubHS Call_Setup Tlk/Data Security Remote
Status
DeviceHS VF Identity DTE Options Record
Major
Minor
Status
Dial
Thresh
Security
Port1 SigQual 1
RcvLevel 1,2
Sig/Noise 1,2
NrEchLvl 1
FarEchLvl 1
FarEchDel 1
EchoFreqOff 1
NonLnearDist 2
Retrains 2
Ser#
Mod#
FRev
HPt#
FPt# LSD
DTR
DSR
Tst
TXD
RXD
RTS
CTS Display
Clear
“Status”
1 These parameters appear for V.32 terbo, V.32bis, and V.32 modulations.
2 These parameters appear for Trellis Multipoint modulation.
Line = Pri 4W APL
Line = Pri 2W APL
Line = Bkup 2W APL
Line = Dial Backup
Line = Dial ONLY
Line = No Sync
Backup
4