Paradyne 3910 User Manual

Page 130

COMSPHERE 3900 Series Modems

7-10

September 1998

3910-A2-GN32-40

•

For Single download configurations, know the remote access password and the network
management address of the remote tributary modem that will receive the download. Refer
to the Misc section in Chapter 4 for a description of the remote access password
(RemAccssPasswrd) configuration option and the network management address
(NetMngmtAddress) configuration option.

•

For Multiple download configurations, ensure that the control modem’s active poll list
contains all the network management addresses for the remote tributary modems that will
receive the download (refer to Chapter 6, Poll List Branch), and ensure that the tributaries
are responding properly to polls (refer to Chapter 9, Sub-Network Health and Status
Branch).

Cloning a Single TMp Remote

Choose DLL Type >
Single

Multiple

Press the F1 key to select Single Clone Remote.

Choose Address:
Ent

xxx

The address field (xxx) displays the network management address of the modem that will receive
the download. The valid address field range is from 001 to 256.

To increment digits within the address field (xxx), use the

and

keys to position the

cursor ( _ ) under the digit that will be incremented. Press the F2 (

") key to increment the digit.

Press Enter (Ent) to select the modem that will receive the download.

Choose Password:
Ent

yyyyyyyy

The password field (yyyyyyyy) displays the remote access password for the modem that will
receive the download.

To increment digits within the password field (yyyyyyyy), use the

and

keys to position

the cursor ( _ ) under the digit that will be incremented. Press the F2 (

" ) key to increment the

digit.

Press Enter (Ent) to select the modem that will receive the download.