Paradyne 3910 User Manual

Page 213

COMSPHERE 3900 Series Modems

14-24

September 1998

3910-A2-GN32-40

Table 14-3

(10 of 13)

391x Series S-Registers

S-Register

DCP LCD

Command

Sequence

Description

S82

V.32bis Autorate (Leased Line). Register determines if Autorating is
used on leased lines when connected in V.32bis mode.

0 = Enable
1 = Disable

The factory setting is Enable.

Configure\Edit\
Leased Line

S84

AT Command Mode. Register determines how the modem responds to
valid and invalid AT commands.

0 = Normal
1 = No ERROR
2 = No Strap or ERROR

The factory setting is Normal.

Configure\Edit\
DTE Dialer

S85

Fast Disconnect. Register allows the modem to disconnect
immediately after receiving a disconnect command from a local DTE
or its own diagnostic control panel.

0 = Disable
1 = Enable

The factory setting is Disable.

Configure\Edit\
Line Dialer

S88

Straps When Disconnected. Register determines whether or not
configuration options in the Active (Saved) configuration area are
reloaded to Active (Operating) when a disconnect occurs.

0 or 231 = No Change
1 or 232 = Reload

The factory setting is No Change.

Configure\Edit\
Misc