beautypg.com

Circuit pack lock – Paradyne 3910 User Manual

Page 35

background image

Modem Installation

2-11

3910-A2-GN32-40

September 1998

5. Press the

Select

key to place the SDCP in direct communication with the selected

modem.

The LCD displays the Top-Level menu for the selected modem. In addition, the Front
Panel
LED on the modem’s faceplate and the OK LED on the SDCP light.

6. Once you have determined that the modem is installed properly and completed its

power-up self-test, rotate the circuit pack lock until it covers the faceplate latch
(Figure 2-3) and tighten the retention screw on the circuit pack lock. This prevents the
modem from accidently being removed once it is installed in a carrier.

7. Configure the modem as described in Selecting Factory Configuration Options on

page 2-6.

Figure 2-3. Circuit Pack Lock