Paradyne 3910 User Manual

Page 167

Dial Access Security

12-5

3910-A2-GN32-40

September 1998

Set Access Ctrl

Set Access Control allows you to configure critical parameters contained within the security
database table that control dial access security. These parameters are protected by an
Administrative Password, which is an 8-digit decimal number.

Set Access Control contains the Edit Password Table, Set Answer Security, Set Originate Security,
and Set Administrative Password security configuration groups. These groups do not appear on the
LCD until the correct Administrative Password is entered.

Admin Password?

The Administrative Password is an 8-digit decimal number password that allows only authorized
users to access Security branch functionality. This password must be entered every time you access
the Security branch. This feature ships from the factory with the Administrative Password set to
00000000.

Once the correct Administrative Password is entered, the Edit Password Table, Set Answer
Security, Set Originate Security, and Set Administrative Password groups can be displayed on the
LCD.

To enter your Administrative Password from Set_Access_Ctrl, make the following selections:

Security

Set_Acess_Ctrl

Select Set_Access_Ctrl from the Security branch.

Admin Password?
Ent

00000000

The Administrative Password appears. This occurs every time you enter the Security branch.

Select the F2 (

" ) key to increment password values.

Press the

key to move the cursor to the next position.

Continue this sequence until the full Administrative Password value appears and then select Ent.

Set Access Ctrl

EditPassWdTable

If the correct value is entered, the EditPassWdTable group appears on the LCD.