Pitney Bowes DM300C - Manual (Page 38)

3-8
3 • Running Mail
SV62261 Rev. B
Processing Flats, Packages, or Non-Letter Mail
If your mail piece is too thick to pass through the feeder (non-Letter
size), you can use a tape strip to print the indicia on, then apply it to
your mail piece.
Printing a Single Tape Strip
1. Push the tape lever to the right and drop tapes down into the slot.
i NOTE: The printable side of the tape should be facing
towards the control panel display (to the right).
Printing Multiple Tape Strips
i NOTE: Ensure the system is confi gured to print multiple tapes.
Refer to Chapter 7, System Options, "Confi guring the Tape
Button" for more information.
• If the system is ready to print postage and on the Home screen,
simply type in number of tapes you wish to print and press Tape
OR
• Press Tape . You will be prompted to enter the tape quantity.
Press Start to begin printing tapes.
2. Press Tape when ready to print. By default, a single tape will be
printed.