Pitney Bowes DM300C - Manual (Page 100)

7-12
7 • System Options
SV62261 Rev. B
Configuring the Tape Button
You can specify the action the system takes when the Tape button is
pressed.
1. Press
Menu .
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Configure Tape Button".
• If you always want to print one tape at a time, select "Always
Print One Tape".
• If you want to enter the number of tapes to print, select "Ask
For Tape Quantity".
Once you make your selection, the system returns to the Setup
Menu.
Basic Options (cont'd)