Paradyne 392xPLUS - Manual (Page 92)

DCP Operation
3-55 3920-A2-GN31-30 November 1996
To access the Test branch from the Top-Level menu, make the following selections:
F1
Leased:28.8
Control
Test
F2 F3
Press the key until Test appears. Select Test.
Abort
Abort ends any test that is in progress and brings the modem back to the normal mode of
operation. Confirmation is provided by the Command Complete message.
To access Abort from the Test branch, make the following selection:
F1
Test: >
Abort Self
F2 F3
Select Abort.
F1
Test:Abort
Command Complete
F2 F3
The modem stops all tests currently in progress and displays the Command Complete status
message on the LCD.
To exit this function and remain in the Test branch, press the key. To exit and return to the
Top-Level menu, press the key.