Directory locations – Paradyne 392xPLUS User Manual

Page 108

DCP Operation

3-71

3920-A2-GN31-30

November 1996

Entering Telephone Numbers and Dial Command Modifiers into Directory Locations

The following example uses an empty directory location for describing how to enter a telephone
number. If you want to change an existing telephone number in any of the 24 directory locations,
follow the same procedures.

To add a telephone number to a directory location, make the following selections:

02:

Nxt

Select Nxt until a blank directory appears on the LCD. (The cursor ( _ ) always appears in the first
character position.)

Select F2 (

" ) or F3 ( # ) until the desired character is selected. This can be an alpha or numeric

character.

02:

Nxt

Press the

key to move the cursor to the next character position.

Continue this key sequence until the dial command modifiers and telephone number are entered.
(Refer to Table 3-9 for a list of valid dial command modifiers.)

01:9W5556789

Nxt

To save the number just entered, scroll to the next directory location by selecting Nxt. The number
is now stored in nonvolatile memory.

Table 3-9 describes what can be entered in directory locations.