Connect incoming call (cic), Program normal (prn), Request list of delayed numbers (rld) – Paradyne 392xPLUS User Manual
Page 231: Request list of forbidden numbers (rlf)
COMSPHERE 392xPlus Modems
D-4
November 1996
3920-A2-GN31-30
Connect Incoming Call (CIC)
The CIC command forces the modem to cancel any DIC commands and answer an incoming
call. This command is only valid when the DTE issues a DIC command. CIC must be issued
within 10 seconds after sending a DIC. CIC is similar to the ATA command.
The CIC command format is CIC.
If CIC is issued within 10 seconds, the modem sends the VAL response to the DTE. If CIC is
issued after 10 seconds, INV is returned.
Program Normal (PRN)
The Program Normal (PRN) command allows the DTE to enter and store a telephone number to
a specific directory location. PRN is similar to the AT&Z command.
The PRN command format is:
PRNx;n
Where:
x is the directory location 1–24
n is the telephone number.
Request List of Delayed Numbers (RLD)
The Request List of Delayed Numbers (RLD) command displays telephone numbers that are
currently delayed as a result of failed call attempts. All the numbers currently delayed are
displayed, irrespective of whether they belong to a directory location.
The RLD command format is RLD.
Request List of Forbidden Numbers (RLF)
The Request List of Forbidden Numbers (RLF) command displays telephone numbers that are
forbidden as a result of failed call attempts. All the numbers forbidden are displayed, irrespective
of whether they belong to a directory location.
The RLF command format is RLF.