Paradyne 392xPLUS - Manual (Page 117)

DCP Operation
3-81 3920-A2-GN31-30 November 1996
Diagnostic Control Panel Access
NOTE
This page of the manual is self supporting and can be removed to
prevent unwanted knowledge of the DCP security access
selections.
Use the DCP security access function to “lock” the DCP of any 392xPlus modem and prevent
unwanted user access. Two options are available for this function: Grant and Deny.
Grant allows any branch of the Top-Level menu to be accessed from the DCP. Deny only allows
access to the Status branch of the Top-Level menu. All 392xPlus modems are shipped from the
factory with DCP access granted.
To access the Front Panel (DCP) Security Access function, perform the following:
Press the key three times.
Press the key twice.
Press the key once.
F1
Frnt Panl Acces
Grant Deny
F2 F3
Select Grant to allow access or select Deny to lock DCP access.
Either selection results in a return to the Top-Level menu.