Printronix L5520 - Manual (Page 220)

Appendix C Host I/O Interfaces
220
RS-232 Serial Interface Configuration
The printer is configured for the RS-232 serial interface via the
Serial Interface menu, as described on page 66. The following
interface configuration parameters may be modified to meet
specific application requirements:
NOTE: Only the factory default settings are shown above. See
Chapter 3 for additional options.
RS-422 Serial Interface
This interface is used with bit serial devices compatible with
EIA-RS-422B or CCITT V.27 and V.11 standards. The interface
circuit characteristics are compatible with the Electronic Industry
Association Specification.
The printer is configured as Data Terminal Equipment (DTE).
Host Protocol XON/XOFF
Baud Rate 9600
Data Bits (Word Length 8 Data Bits
Stop Bits 1 Bit
Parity None
Data Term Ready True
RTS Function Online & BNF
Buffer Size In K 64
Poll Character 0
Poll Response 0 MS.
Idle Response Disable
One Char Enquiry Disable