Clearing a fault when reprint on fault is enabled, A fault occurs, Press clear – Printronix L5520 User Manual
Page 185: A. the printer goes offline, B. press online to resume printing
Reprinting Pages After A Fault Condition
185
Clearing A Fault When Reprint On Fault Is
Enabled
1.
A fault occurs.
2.
Do what is necessary to correct the fault condition.
3.
Press CLEAR.
4.
The STAND BY LED blinks and the following message appears
while the printer attempts to clear fault:
•
If the fault is not cleared:
a.
The printer beeps and briefly displays the following
message:
b.
The printer then redisplays the original fault message,
or any other uncleared fault message.
c.
Attempt to clear the fault condition again, or contact
your service representative.
•
If the fault is cleared, and if you do
not need to reload the
paper into the tractors (for example, the printer ran out of
toner):
a.
The printer goes OFFLINE.
b.
Press ONLINE to resume printing.
•
If the fault is cleared, and if you need to reload paper into
the tractors (such as after a paper jam), the following
message appears:
Clear Paper Path
for Reprint
Standby ...
Clearing Fault
Faults Not Cleared