Printronix L5520 - Manual (Page 103)

Downloading Into Flash Memory
103
13. If you have no emulation software to install and you are
installing only logo, form, TIFF, setup, or font files, skip to
step 37. If you do have emulation software to install, continue
with step 14.
14. Set the printer power switch to O (Off).
15. If the emulation you are installing is supplied on a single
diskette, skip to step 28. If the emulation is supplied on two or
more diskettes, you must first recombine the multiple files from
the diskettes into one file on your computer’s hard drive;
continue with step 16.
16. Create a directory on your computer hard drive where you will
store the recombined files from the emulation diskettes by
typing the following at the DOS prompt:
MD DOWNLOAD
17. Make the newly-created directory the “active” directory by
typing the following at the DOS prompt:
CD DOWNLOAD
18. Insert the last emulation diskette in the series (e.g., 2 of 2, 3 of
3, etc.) into diskette drive A (or B) of the computer.
19. Get the name of the compressed emulation file on the diskette
by typing the following at the DOS prompt:
DIR A:
(If the diskette is in drive B, type B: )
The file name of the compressed file on the diskette takes the
form
part_num.zip , for example 123456.zip.
20. At the DOS prompt type:
A:\PKUNZIP A:\ part_num
part_num is the six digit number you noted in the previous
step. (Replace A: with B: if you are using the B drive.)