Perle Systems Adaptors - Manual (Page 71)

FAST Serial Adaptors User Guide
Installing under SCO UnixWare
Page 71
Chapter 2 Installing drivers and host cards
Removing cards and software
To remove a PCI-FAST card, jump to step 5.
1. Run the atfconfig utility.
/etc/comf/atfconfig
2. At the Action? prompt, select D. Delete a card.
3. Reboot the system.
sync
init 6
To remove an AT-FAST card:
1. Run dcu from the command line as root, or Admin_Tools/Hardware_Setup from the
desktop as the system owner.
2. Select Hardware Device Configuration. Use the PgDn and/or Down-arrow key to move
the cursor to the first column of the entry for the card to be removed.
3. Type N into this column, then press F10.
4. Press A, then .
5. Run the atfconfig utility.
/etc/comf/atfconfig
6. At the Action? prompt, select D. Delete a card.
7. Reboot the system.
sync
init 6