Perle Systems Adaptors - Manual (Page 20)

FAST Serial Adaptors User Guide
Installing under Windows 95
Page 20
Chapter 2 Installing drivers and host cards
General setup procedure for Windows 95
The general procedure for installing FAST cards under the Windows 95 operating system is
as follows;
1. Install any PCI host cards and distribution cables or boxes you require into your system.
See Installing host cards and distribution accessories on page 79 .
2. If you have installed any PCI host cards, now install the driver software using the
procedures given in Installing Windows 95 drivers for PCI-FAST cards on page 21 .
3. If you are going to install AT cards on your system, install driver software using the
procedures given in Installing Windows 95 drivers for AT-FAST cards on page 23 .
4. Install any AT cards and distribution cables or boxes you require into your system. See
Installing host cards and distribution accessories on page 79 .
5. If required, remove any host cards you want from your system. See Removing host
cards on page 103 .
Note
Up to four PCI-FAST 4/8/16 cards or Up to four AT-FAST 4/8/16 cards
PCI and AT bus cards cannot be mixed in Windows 95 machines.
Note
To remove drivers see De-installing the driver for PCI-FAST cards on page 22 .
Note
To remove drivers see De-installing the driver for AT-FAST cards on page 25 .