Perle Systems Adaptors - Manual (Page 61)

FAST Serial Adaptors User Guide
Installing under SCO OpenServer 6
Page 61
Chapter 2 Installing drivers and host cards
Menu map The Port Configuration tool menu is as follows;
Selecting ports 2. In the Port Configuration window, select the ports you want you want to configure by
clicking on one or more items in the list of ports (example in next picture).
Selecting a getty
definition 3. In the Port Configuration window, select the getty definition you want by double clicking
on an item in the Available gettydefs list. Alternatively, click on the Set button.
Menu
option
Description
Ports > Quit Quit Port Configuration tool without saving
changes.
Logins Display all ports with logins enabled.
Unconfigured Display all ports without logins enabled.
All Display all ports.
Save & Exit Exit the Port Configuration tool and save
changes.
Hint
To select multiple items which follow each other in the list, hold down the Shift key and click
on all the items you want.
To select multiple items from anywhere in the list, hold down the Ctrl key and click on all the
items you want.