Perle Systems Adaptors - Manual (Page 57)

FAST Serial Adaptors User Guide
Installing under SCO OpenServer 6
Page 57
Chapter 2 Installing drivers and host cards
12.In the Install Selection window, click on the Install button.
The following progress message is now displayed.
The above window will display various progress messages and then the Speed
Installation Options window will be displayed.
13.If required, in the Speed Installation Options window, select the Re-Link kernel option.
14.In the Speed Window Installation menu, click on Options > Exit to close the window and
continue the installation process.
If you select Re-link kernel , a message window is displayed at the end of the driver
installation prompting you to re-boot the system.
Hint
If you are installing more then one driver, you can de-select this option until you
have installed all the drivers and utilities you require to save time.