Installing under windows nt – Perle Systems Adaptors User Manual
Page 26
FAST Serial Adaptors User Guide
Installing under Windows NT
Page 26
Chapter 2 Installing drivers and host cards
Installing under Windows NT
The procedure for installing and configuring host cards, drivers software and associated
utilities for the Windows NT operating system is as follows:
1. Install any PCI host cards and distribution cables or boxes you require into your system.
See
Installing host cards and distribution accessories
2. Install any AT cards and distribution cables or boxes you require into your system. See
Installing host cards and distribution accessories
3. If required, remove any host cards you want from your system. See
4. Use the PortDirector software to update your system with the revised number and type of
host cards. See The PortDirector user guide part number 5500028 for further details.
Your system can now use the serial adaptor cards you have installed.
Note
The Perle PortDirector software contains drivers for the FAST host cards.
You will need to install the PortDirector
for WIndows NT
on your system in order to use
the FAST host cards.
See
Chapter 5 Adding and deleting host cards
in the
PortDirector
User guide
part number
5500028
for further details.