Lanier LP222cn - Manual (Page 499)

Troubleshooting
79
No Files exist There are no files available for
Sample Print job or Locked
Print job. Wait for two seconds until the
previous display appears.
Offline The printer is offline and can-
not print data. Press {Online} key.
Please wait... The printer is cooling down. Wait a while.
Processing... Print data is being processed. Wait a while.
RC Gate
connection error
Cannot communicate with RC
Gate. Check the device or the RC
Gate network connection.
Ready The default ready message.
The printer is ready to use. No action required.
Remove Misfeed
B: Fusing Unit
There is a misfeed in the fus-
ing unit. Remove the misfed paper.
See p.99 “When “Remove
Misfeed B: Fusing Unit” Ap-
pears”
.
Remove Misfeed
A: Internal Path
There is a misfeed in the print-
er. Remove the misfed paper.
See p.96 “When “Remove
Misfeed A: Internal Path” Ap-
pears”
.
Remove Misfeed
Y: Paper Tray
There is a misfeed in the input
tray, or the printer is not feed-
ing paper. Remove the misfed paper.
See p.102 “When “Remove
Misfeed Y: Paper Tray” Ap-
pears”
.
Remove Misfeed
Z: Duplex Unit
There is a misfeed in the du-
plex unit. Remove the misfed paper.
See p.104 “When “Remove
Misfeed Z: Duplex Unit” Ap-
pears”
.
Remove Paper
Standard Tray
The standard output tray is full. Remove paper from the stan-
dard output tray.
Replace Black
PCU
It is time to replace the black
PCU. Replace the black PCU.
See p.35 “Replacing the Pho-
to Conductor Unit” .
Replace Black
PCU soon
The time to replace the black
PCU is soon. Prepare to replace the black
PCU when the message [Re-
place Black PCU] appears on
the display.
Replace Color
PCU
It is time to replace the color
PCU. Replace the color PCU.
See p.35 “Replacing the Pho-
to Conductor Unit” .
Messages Description Recommended Action