Lanier LP222cn User Manual
Page 345
Monitoring and Configuring the Printer
226
Change IP address from DHCP Server.
The IP address changes when DHCP lease is
renewed. To always assign the same IP ad-
dress, set a static IP address to the DHCP
server.
child process exec error! (process name)
The network service failed to start. Turn the
printer off and then on. If this does not work,
contact your service or sales representative.
Connected DHCP Server(
The IP address was successfully received
from the DHCP server.
connection from
Login was from the host IP address.
Could not attach to FileServer
(In the remote printer mode) Connection to the
file server has not been established. The file
server has refused the connection. Check the
file server configuration.
Could not attach to PServer
(In the remote printer mode) Connection to the
print server has not been established. The
print server has refused the connection. Check
the print server configuration.
Current Interface Speed:xxxMbps
Speed of the network (10 Mbps or 100 Mbps)
Current IP address
The IP address
ceived from the dhcp server.
Current IPX address
Current ipx address
DHCP lease time expired.
DHCP lease time has expired. The printer tries
to discover the DHCP server again. The IP ad-
dress until now becomes invalid.
DHCP server not found.
The DHCP server was not found. Make sure
that the DHCP is on the network.
dhcpcd start.
The DHCPCD service (dhcp client service)
has started.
Duplicate IP=
The same IP address is used. Each IP address
must be unique. Check the address of the de-
vice indicated in [MAC address].
Established SPX Connection with PServ-
er,(RPSocket=
nID=
(In the remote printer mode) Connection to the
print server has been established.
exiting
The lpd service has ended and the system is
exiting the process.
Exit pserver
(In the print server mode) The print server
function is disabled because the necessary
print server settings have not been made.
Frametype =
The frame type name is configured to be used
on NetWare.
httpd start.
The httpd service has started.
Message
Problem and solutions