Lanier LP222cn User Manual

Page 327

Monitoring and Configuring the Printer

208

• Use the “primary” command to configure a primary WINS server IP ad-

dress.

• Use the “secondary” command to configure a secondary WINS server IP

address.

• Do not use “255.255.255.255” as the IP address.

❖ NBT (NetBIOS over TCP/IP) Scope ID Selection

You can specify the NBT scope ID.

msh> wins “interface_name” scope “scope ID”

• The scope ID can be entered using up to 31 alphanumeric characters.

• Be sure to specify the interface.

• ip1394 can be specified only when the IEEE 1394 interface is installed.

• wlan can be specified only when the IEEE 802.11b interface is installed.

Interface name

Interface configured

ether

Ethernet interface

ip1394

IEEE 1394 interface

wlan

IEEE 802.11b interface