Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 89)

Supplies & Handling 4
bizhub PRO 920 4-11
Su
ppli
e
s &
Hand
ling
Ch
apt
e
r 4
Loading Tabbed Sheets in Multi-Sheet Bypass Tray
0 The tab extension width should be 12.5 mm or less.
1
Open the Multi-sheet bypass tray.
2
Load tabbed sheets as illustrated above.
3
Adjust the paper guides to the paper size.
4
Specify the paper type for the Multi-sheet bypass tray.
!
Detail
See page 9-15 for specifying the paper type of the Multi-sheet bypass
tray.
Rear
Front
Rear
Front
Example: 3 tabbed sheets loaded in position for one finished set
Example: 9 tabbed sheets loaded in position for 3 finished sets
Printed
side
1st TAB
3rd TAB
ONE FINISHED SET
3 FINISHED SETS
Printed
side
1st TAB
1st TAB
1st TAB
3rd TAB
3rd TAB
3rd TAB
2nd TAB
2nd TAB
2nd TAB
2nd TAB